Automatic Gate and Door Controllers

Elsema has control cards for all types of gates and doors. Our cards can support automatic swing gatessliding gatessolar gates, domestic garage doors, industrial roller shutters, driveway gates and the list goes on. These controllers were built from the ground up, based on customer feedback and using today’s technology.

With its rich functions, consumer friendly prices and with the focus during development being ease of use and setup makes the controllers the ultimate board to control your motors.

The 3rd Generation Eclipse® series is made up of four control cards, MC, MCS, MC240 and MCi-VSD. The MC control card is used to control double or single automatic gates with motor voltages of 24 or 12 volts. The MCS control card is smaller in dimensions than the MC and MC240 and is used to control single automatic gates with motor voltages of 24 or 12 volts. Having a smaller control card for single automatic gates allows the control card to be installed in the motor gearbox cover, which is the case with many sliding gates. The MC240 control card is the same size as the MC and can be used to control double or single automatic gates with motor voltages of 240 Volt AC. The MCi Controller has been specifically designed to control Variable Speed Drives (VSD). Elsema’s MCi-VSD kit comes with its own Omron VSD with option of controlling a 3-phase 240 Volt AC motor.

All four control cards have the Eclipse® operating system embedded inside a high powered micro-processor. This Eclipse® operating system allows for easy setup or service any type of automatic gates. The controls for the Eclipse® operating system is done with a single push button on the control card and the instructions are displayed on a large LCD. With the single button and easy instructions on the LCD, most users do not even use the manuals to operate the control card.

The control cards can be used to replace damaged control cards or to upgrade a current installation with more advanced features which will give you fast and secure gate operation. OEM customers can work with Elsema engineers to further integrate the Eclipse® control cards into their own gate motors.
Complete motor kits are also available for each control card to operate sliding or swing gates.

MC, Single or Double Automatic Gate Controller for 12 or 24 Volt DC motors

MCS, Single Automatic Gate Controller for 12 or 24 Volt DC motors

MC240, Single or Double Automatic Gate Controller for 240 Volt AC motors

MCi-VSD, Variable Speed Drive control for 3-phase 240VAC motor

Complete Kits for Automatic Gates

Gate Controller Selection Flow Chart

Smart gate controller

Double or Single Controller for 12 or 24 Volt Motors                    

MC – Eclipse® Operating System
– Double or Single Automatic Gates
– Digital Speed Adjustment
– Day and Night Sensor
– One Touch Setup… read more
Automatic Sliding gate control card

Single Controller for 12 or 24 Volt Motor                                    

MCS – Eclipse® Operating System
– Single Automatic Gate
– Lithium & SLA Battery Charger
– Small PCB Size
– One Touch Setup… read more
240VAC gate controller

Double or Single Controller for 240 Volt AC Motors                

MC240 – Eclipse® Operating System
– Double or Single Automatic Gates
– Digital Force Adjustment
– Day and Night Sensor
– One Touch Setup… read more
VSD-kit

Variable Speed Drive Control for 3-phase 240 Volt Motor

MCi-VSD – Eclipse® Operating System
– Obstruction Detection
– Dynamic Braking
– Instant Stop on Obstruction
– One Touch Setup… read more
gate controller for Inverter

Control Card for VSD or Contactors                            

MCi – Eclipse® Operating System
– Double or Single Automatic Gates
– Connects Directly to VSD
– Connects Directly to Contactors
– One Touch Setup… read more

Eclipse® Operating System for Automatic Gates

Automatic gate controller