Vehicle Loop Detectors
An inductive loop detector is used to detect motor vehicles. When the motor vehicle drives over the detectors wire loop the detectors senses the metal and then a relay is activated.
This relay is connected to the motor controller card to automatically open the gate or door. Elsema sells high and medium sensitivity detectors with 1 or 2 channel relay outputs.
Elsema has a range of Saw-Cut loops and Direct Burial loops. They are pre-formed with recommended loop sizes for commercial or domestic applications and makes installation quick and easy.
- Vehicle Loop Detectors for Automatic gates and doors
- Pre-made Inductive loops
Automatic Swinging Gate
FOB Remote Controls
Keyring Remote Control
Automatic Gate controllers
Receivers to match PentaCODE® transmitters
Weatherproof Photo Electric Beam
Retro-reflective Photo Beam
2-Channel Metal Loop Detector
High Sensitive Metal Loop Detector
Open gates with a free call from your mobile
Magnetic locks for gates and doors
IP66 Rated cases in various sizes
IP66 Rated Strobe or Flashing Lights