Automatic Gate and Door Controller Series for
120VAC, 240VAC Single Phase and 415 Volt Three Phase Motors
We have a wide selection of electronic automatic gate and door controllers for swing gates, sliding gates, roller doors, garage doors, sliding doors and solar gates.
 Gate and Door Controller Selection Flow Chart
Gate and Door Controller Selection Table
 
|
Suitable for Motors up to 1.5kW (2.0Hp)
Automatic gate and door controller enclosed in an IP66 rated case, including high efficient toroidal transformer, external push buttons for manual control and a standard AC cord and plug for easy installation.
Application: Roller Door or Garage Door.
|
|
 
|
Suitable for Motors up to 3kW (4.0Hp)
Automatic gate and door controller enclosed in an IP66 rated case, including high efficient toroidal transformer, external push buttons for manual control and a standard AC cord and plug for easy installation.
Application: Roller Door or Garage Door.
| (240S3E) |
| Motor |
: |
3-Wire motors up to 3 kW (4.0HP). |
| Motor Voltage |
: |
240 Volts AC |
| (240S4E) |
| Motor |
: |
4-Wire motors up to 3kW (4.0HP) |
| Motor Voltage |
: |
240 Volts AC |
|
|
 
|
Suitable for 3-Phase Motors up to 1.6kW (2.2Hp)
Universal door controller enclosed in an IP66 rated case, including high efficient toroidal transformer, external push buttons for manual control, key switch input and optional wireless remote control.
Application: Roller Door or Garage Door.
| (415S1E-2.4) |
| Motor |
: |
3-Phase motors up to 1kW (1.3HP) |
| Motor Voltage |
: |
415 Volts AC |
| (415S1E-4.0) |
| Motor |
: |
3-Phase motors up to 1.6kW (2.2HP) |
| Motor Voltage |
: |
415 Volts AC |
|
|
 
|
Automatic gate and door controller for 240VAC Motors.
Board Size : 163 x 94 mm
Application: Swing Gate, Sliding Gate, Roller Door and Garage Door.
| (240S1) |
| Motor |
: |
Single motor up to 1.5kW (2.0Hp) |
| Motor Voltage |
: |
240 Volts AC |
| (120S1) |
| Motor |
: |
Single motor up to 1.5kW (2.0Hp) |
| Motor Voltage |
: |
120 Volts AC |
|
|
 
|
Automatic gate and door controller for 240VAC motors with key switch inputs for added safety.
Board Size : 148 x 120 mm
Application: Swing Gate, Sliding Gate, Roller Door and Garage Door.
| (240S2) |
| Motor |
: |
Single motor up to 1.5kW (2.0Hp) |
| Motor Voltage |
: |
240 Volts AC |
| (120S2) |
| Motor |
: |
Single motor up to 1.5kW (2.0Hp) |
| Motor Voltage |
: |
120 Volts AC |
|
|
|
 |
Single 240V Motor Drive Controller
(COBO40S)
| Motors |
: |
Single Motor |
| Motor Voltage |
: |
240 Volts AC |
|
|
 |
Double 240V Motor Drive Controller
(COBO40D)
| Motors |
: |
Double Motor |
| Motor Voltage |
: |
240 Volts AC |
|
|
|
|
|
