FMT15108H
8-Channel 151MHz Handheld Transmitter

Features
• Portable, handheld 151MHz transmitter, easy to carry.
• Operates up to 800 metres.
• Uses standard 9-Volt battery.
• Includes pre-tuned antenna.
• Not affected by electrical interference, suitable for industrial applications where there is normally a high level of interference.
• Simultaneous channel transmission is possible; i.e. more than one channel can be activated at the same time.

Application
• Pump Control
• Long distance panic button
• On/Off applications in agricultural devices
• Security alarm

151MHz transmitter with SMA
 Click image to enlarge
Download Datasheet

Description
Products in the Range
Technical Data
Label Dimensions
Transmitter Selection Flow Chart

Description

The FMT15108H is a hand held 8 channel transmitter that has an operating range of up to 800 metres. With 100mW transmission power and only using 85mA during transmission makes it ideal for the standard 9 volt battery.

Each transmitter button is individually transmitted to the receiver making it possible to do simultaneous channel transmission. This means that up to 8 different functions can be done at the same time. Each button can operate any FMR151… series receivers making it possible to transmit each button to different single channel receivers or to multi channel receivers.

The transmitter uses a frequency of 151MHz and a modulation type of Narrow Band Width FM which makes it suitable for industrial applications where you would have a high level of electrical interference. This transmitter is not affected by man made or electrical interference.
 
The transmitter uses a specially programmed micro-controller which ensures the highest reliability, low standby current consumption (10uA) and greater flexibility.  The greater flexibility allows customers to contact Elsema and request custom written software for special functions.

Compatible Receivers

FMR15101               1-Channel Receiver with Relay Output
FMR15101240        1-Channel Receiver with 240VAC Supply and with Relay Output
FMR15102               2-Channel Receiver with Relay Output
FMR15102240        2-Channel, Receiver with 240VAC Supply and with 2-Relay Outputs
FMR15104               4-Channel Receiver with 4-Relay Outputs
FMR15108               8-Channel Receiver with 8 Open Collector Outputs
FMR1510812R       8-Channel Receiver with 12VAC or DC Supply and with 8-Relay Outputs
FMR1510824R       8-Channel Receiver with 24VAC or DC Supply and with 8-Relay Outputs

 

Products in the Range

151MHz long range transmitter

 Click image to enlarge

151MHZ outdoor transmitter

 Click image to enlarge

151MHz transmitter in metal case
 Click image to enlarge
8 channel 151MHz transmitter

 Click image to enlarge
FMT15101E
1-Channel, Enclosed
FMT15102E
2-Channel, Enclosed
FMT15104E
4-Channel, Enclosed
FMT15108E
8-Channel, Enclosed
Long range 151MHz transmitter
 Click image to enlarge

Long range transmitter without case
 Click image to enlarge

Transmitter with ternimals
 Click image to enlarge
151MHz transmitter without case
 Click image to enlarge
FMT15101
1-Channel (No Case version)
FMT15102
2-Channel (No Case version)
FMT15104
4-Channel (No Case version)
FMT15108
8-Channel (No Case version)
     
FMT15108H
8 channel Hand Held
     

 

Coding Instructions
The 12 way dip switch on the transmitter sets the 12 bit unique code for the system. This has to be matched to the receivers 12-way dip switch.

Operating Frequency  
There are 7 selectable frequencies available. The black 3-way dipswitch changes the frequency. If two separate systems are installed in the same location it is recommended to set each system to a different frequency. The default setting is 151.600 MHz (All 3 dipswitches "ON”). Following is a table with the Dipswitch settings and the corresponding frequencies.

frequency selector


Frequency

1

2

3

151.600 MHz

On

On

On

152.375 MHz

Off

On

On

151.775 MHz

On

Off

On

151.400 MHz

Off

Off

On

151.175MHz

On

On

Off

151.025 MHz

Off

On

Off

150.900 MHz

On

Off

Off

150.825 MHz

Off

Off

Off

 Technical Data

Power Supply

9V DC. Alkaline battery.

Current Consumption

85mA at 9VDC (Only when transmitting)

Standby Current
Less than 10uA.

Operating Frequency

151.6MHz (8 selectable frequencies. See table above)

Carrier Frequency Tolerance

VCO with 10ppm Crystal Controlled reference Oscillator. (0-50°C)

R.F. Output Power

100mW, into 50 ohms SMA socket.

Antenna

151MHz tuned antenna included with the transmitter.

Type Of Emission

Narrow-band-width Frequency Modulation.

Frequency Deviation

+-5 kHz

Spurious Transmission

< -40dBm (100nW)

Baud Rate

40 to 4800bps

Digital Coding System

On-board 12-way code switch.

Dimension

130 X 67 X 27 mm

Weight

60 grams.

Useable Operating Range

Up to 800 metres, depending on installation.

Compatible Receivers

Elsema type FMR151... series (With correct setting on the dip switch).

Label Dimensions

Customers who wish to have their own membranes can email us their designs.

Send your designs to mem@elsema.com

You can have your own company logo and specific text printed on the membranes. e.g. Up, Down, Right and Left or Start, Stop etc.

The minimum quantity for custom membranes is 10 pieces per order.