FMT-102A

This 2-channel remote control transmitter is used for remote control applications where code switch number 10 is used to address the two channels i.e. Channel 1 is code switch 10 ON and Channel 2 is code switch 10 OFF. This transmitter is used when the receiver has a 10-way code switch and code switch 11 and 12 are hard wired on the printed circuit board. This hard wiring of track results in four possible combinations, which is known as Group 1, 2, 3 and 4. This is explained below

When ordering an FMT-102A transmitter you must specify which group you want.

 Click image to enlarge
Download Datasheet

FMT-202MS

2-channel remote control transmitter with Master/Slave ( Dual Access). It is labelled with "M10" at the back of the transmitter.

Download Datasheet

FMT-202DA

This 2-channel remote control transmitter is used for remote control applications where channel 1 is for a main entry and channel 2 is for a private entry ( Dual Access). When channel 1 (Main Entry) is pressed, code switch 1 to 4 is transmitted as is on the code switch and 5 to 12 is transmitted as OFF regardless to the code switch settings. When channel 2 (Private) is pressed, code switch 1 to 12 is transmitted as is on the code switch. This enables the user to have channel 1 (Main Entry) as a common code and up to 256 different, channel 2 codes. An application would be a large home unit where there is a Main Entry (Channel 1) and up to 256 private garages (Channel 2) within the home unit.

 Click image to enlarge
Download Datasheet

Operating Distance

(Range tests were done in an open area test site with line-of-sight operation and no interference. The receiver antenna wire was fixed vertically, away from any metal objects.)

Compatibility

All Elsema type FMR-… series:
FMR-201
FMR-212
FMR-212T
FMR-202
FMR-204/16
FMR204-12
FMR204-24
FMR-240
FMR-232R

Other Products in the Range

FMT-102ANL, FMT-202MSNL, FMT-202DANL No label – click here for instructions

Accessories (Available Seperately)

LP Stylish Leather Pouch

6F22 9V Battery

6LR61 9V Alkaline Battery (For better performance)

Pictures are for illustration purpose only; final product may differ

Power Source

9V Battery

Battery Life

Carbon: 1 year shelf life; Alkaline: 2 years shelf life

Supply Voltage

6-16 VDC (for constant RF-output)

Current Consumption

40mA (typical) at 8VDC supply during transmission

Operating Frequency

27.145MHz (Other freq. available: 27.045, 27.195 & 27.455MHz. NB. 27.455 freq. is not available for Australia )

Carrier Freq. Tolerance

Crystal controlled 30 parts per million (0-50 ° C)

Radiated Field Strength

70dB uV/m at 3m (±3dB) or 3uW

Antenna

Built-in 50mm proprietary DILEC rod

Type of Emission

Narrow-bandwidth Frequency Modulation (5K00F1D)

Bits per second

926bps

Necessary Bandwidth

±5.0kHz

Digital Coding System

Onboard 12-way coding switch (4096 codes) (FMT-302 & FMT-304: 10-way)

Dimension

96 x 55 x 20 mm

Weight

70g (excluding battery)

Useable Operating Range

200m (varies upon receiver antenna & location)

Compatible Receivers

All Elsema type FMR series