Plastic Cases

Elsema stocks a variety of cases which are IP66 and IP54 rated. See table below for Ingress Protection (IP) rating

These enclosures are manufactured from ABS and PC (Polycarbonate) plastic and available with stainless steel latches or plastic type hinges and locking system. The IP66 rated cases are suitable for outside direct sun light installation. They are waterproof and dustproof.

Our large selection of case sizes will meet all your needs.

Ingress Protection of IP66 (Dust tight and Protected against strong spray)

C0818 Stainless steel latch type

Outside Dimension	: 180 x 80 x 70 mm
Inside Dimension	: 165 x 65 x 55 mm

C1015 Plastic latch type and hinge type

Outside Dimension	: 150 x 100 x 70 mm
Inside Dimension	: 125 x 75 x 55 mm
Metal Mounting Plate	: 120 x 70 mm

C1015T Plastic latch and transparent cover

Outside Dimension	: 150 x 100 x 70 mm
Inside Dimension	: 125 x 75 x 55 mm
Metal Mounting Plate	: 120 x 70 mm

C1020 Plastic latch type and hinge type

Outside Dimension	: 200 x 100 x 70 mm
Inside Dimension	: 175 x 75 x 55 mm
Metal Mounting Plate	: 170 x 70 mm

C1020T Plastic latch and transparent cover

Outside Dimension	: 200 x 100 x 70 mm
Inside Dimension	: 175 x 75 x 55 mm
Metal Mounting Plate	: 170 x 70 mm

C1217 Stainless steel latch type

Outside Dimension	: 175 x 125 x 75 mm
Inside Dimension	: 160 x 110 x 60 mm

C1515 Plastic latch type and hinge type

Outside Dimension	: 150 x 150 x 90 mm
Inside Dimension	: 125 x 125 x 75 mm
Metal Mounting Plate	: 120 x 120 mm

C1515T Plastic latch and transparent Cover

Outside Dimension	: 150 x 150 x 90 mm
Inside Dimension	: 125 x 125 x 75 mm
Metal Mounting Plate	: 120 x 120 mm

C1520 Stainless steel latch type

Outside Dimension	: 200 x 150 x 100 mm
Inside Dimension	: 185 x 135 x 85 mm
Metal Mounting Plate	: 180 x 130 mm

C1717 Screw type lid

Outside Dimension	: 175 x 175 x 75 mm
Inside Dimension	: 160 x 160 x 55 mm
Metal Mounting Plate	: 155 x 155 mm

C1722 Plastic latch type and hinge type

Outside Dimension	: 220 x 170 x 110 mm
Inside Dimension	: 190 x 140 x 90 mm
Metal Mounting Plate	: 185 x 135 mm

C1722T Plastic latch and transparent cover

Outside Dimension	: 220 x 170 x 110 mm
Inside Dimension	: 190 x 140 x 90 mm
Metal Mounting Plate	: 185 x 135 mm

C1725 Screw type lid

Outside Dimension	: 250 x 175 x 75 mm
Inside Dimension	: 230 x 160 x 60 mm
Metal Mounting Plate	: 225 x 150 mm

C1725-1 Screw type lid

Outside Dimension	: 250 x 175 x 100 mm
Inside Dimension	: 230 x 160 x 80 mm
Metal Mounting Plate	: 225 x 150 mm

C1929 Plastic latch type and hinge type

Outside Dimension	: 290 x 190 x 140 mm
Inside Dimension	: 260 x 150 x 110 mm
Metal Mounting Plate	: 255 x 145 mm

C1929T Plastic latch and transparent cover

Outside Dimension	: 290 x 190 x 140 mm
Inside Dimension	: 260 x 150 x 110 mm
Metal Mounting Plate	: 255 x 145 mm

C2020-S Screw type lid

Outside Dimension	: 200 x 200 x 95 mm
Inside Dimension	: 185 x 185 x 80 mm
Metal Mounting Plate	: 180 x 180 mm

C2828 Screw type lid

Outside Dimension	: 280 x 280 x 130 mm
Inside Dimension	: 255 x 255 x 110 mm
Metal Mounting Plate	: 245 x 245 mm

C3428 Screw type lid

Outside Dimension	: 340 x 280 x 140 mm
Inside Dimension	: 315 x 255 x 110 mm
Metal Mounting Plate	: 305 x 260 mm

C3428T Screw type lid

Outside Dimension	: 340 x 280 x 130 mm
Inside Dimension	: 315 x 255 x 110 mm
Metal Mounting Plate	: 305 x 260 mm

Inress Protection of IP54 (Dust Protected and Protected against Splashing Water)
The C160 box for control units has an IP 5X dusts resistance rating and an IP X4 liquid resistance rating.

C160

Outside Dimension	: 165 x 115 x 65 mm
Inside Dimension	: 155 x 105 x 50 mm

C220 ABS Plastic Box without battery stud

Outside Dimension	: 220 x 200 x 85 mm
Inside Dimension	: 210 x 190 x 70 mm

C220S ABS Plastic Box with battery stud

Outside Dimension	: 220 x 200 x 85 mm
Inside Dimension	: 210 x 190 x 70 mm

International Protection (IP) Ratings