|
BACH12-200, BACH24-200, BACH12-500, BACH24-500
Battery chargers
Features
• Solar panels can be connected as supply.
• Fast Charging.
• Filtered DC Output.
• Reverse Polarity indicator.
• Charging Indication.
• AC or DC input can be used (refer to the block diagram).
Application
• Charging back-up 12V/24V batteries using solar panels or recommended power source. |
 Click image to enlarge
 Download Datasheet
|
Description
The BACH Series is available in 4 versions, BACH12-200, BACH12-500, BACH24-200 and BACH24-500. The descriptions of these cards are given in the table below. Solar panels can be connected to AC/DC In, to charge backup batteries.
The BACH12-200 and BCAH24-200 have two LEDs. The green LED indicates charging while the red LED indicates wrong battery polarity. The battery polarity should be reversed immediately when the red LED lights up.
The BACH12-500 and BCAH24-500 have only one red LED. The red LED indicates wrong battery polarity. The battery polarity should be reversed immediately when the red LED lights up. They do not have any green LED.
The trimports are preset at the factory and should not be adjusted.
Technical Data
BACH12-200 |
Continuous charge of 200mA, burst charge at 400mA Output preset at 13.6 VDC. |
BACH24-200 |
Continuous charge of 200mA, burst charge at 400mA Output preset at 27.2Volts DC.
|
BACH12-500 |
Continuous charge of 500mA, burst charge at 1000mA (1 Amp) Output preset at 13.6 Volts DC.
|
BACH24-500 |
Continuous charge of 500mA, burst charge at 1000mA (1 Amp) Output preset at 27.2 Volts DC. |
Products in the Range
Block Diagram
BACH Series
|
