Vehicle Loop Detectors

An inductive loop detector is used to detect motor vehicles. When the motor vehicle drives over the detectors wire loop the detectors senses the metal and then a relay is activated.

This relay is connected to the motor controller card to automatically open the gate or door. Elsema sells high and medium sensitivity detectors with 1 or 2 channel relay outputs.

Vehicle Loop Detectors for Automatic gates and doors
Pre-made Inductive loops

High sensitivity vehicle loop detector

Sensitivity	High
Supply	LD30-12: 10 to 14 Volts AC/DC LD30-24: 22 to 28 Volts AC/DC
Output	Single relay output

Sensitivity

High

Supply

LD30-12: 10 to 14 Volts AC/DC

LD30-24: 22 to 28 Volts AC/DC

Output

Single relay output

Medium sensitivity. Ideal for domestic application

Vehicle loop detector for automatic gates and doors

Part Number	MD2010
Supply	12-24 Volts AC/DC
Output	Single relay output

Medium sensitivity, single loop & double relay outputs

Part Number	MD12-1
Supply	12 Volts DC
Output	Double relay output

Medium sensitivity, double loop & double relay outputs

Vehicle loop detector with two loop controls

Part Number	MD12-2
Supply	12 Volts DC
Output	Double relay output

Medium sensitivity, single loop & double relay outputs

Vehicle loop detector with 240 VAC input

Part Number	MD240-1
Supply	240 Volts AC
Output	Double relay output

Medium sensitivity, double loop & double relay outputs

Part Number	MD240-2
Supply	240 Volts AC
Output	Double relay output

Pre-made Inductive Loops

Loop1200	1.2 x 1.2 metres
Loop1500	1.5 x 0.8 metres
Loop2000	2.0 x 1.2 metres

Vehicle Loop Detectors

Related Products