240 Volts AC Controller for Commercial Doors and Industrial Roller Shutters with thermal overloads

Products and Services

About Us

SALES & SUPPORT

Elsema Pty Ltd
31 Tarlington Place
Smithfield NSW 2164
Australia

Controller Card for Single 240 or 120 Volt AC Motors

Universal Controller for 240VAC Motors used on Light Commercial Doors, Heavy Duty Cycle Roller Shutters, Sectional Doors, Garage and Sliding doors

Description
Features
Tech Data
Accessories

Controller for 240Vac motor with 3 wires

Controller for 240Vac motor with 4 wires

The 240S3E and 240S4E industrial controller uses German designed ABB contactors and thermal overloads to control the 240 VAC motor. The 240S3E is for 240 VAC motors using 3 wires and the 240S4E is for 240 VAC motor using 4 wires.

A toroidal transformer is used to power the control card and contactors.

Using a toroidal transformer offers the following advantages:

Excellent efficiency and low leakage losses reducing your electricity consumption
High isolation which protects the electronics from noisy power lines
Low magnetic field radiation and no acoustic noise enabling the controller to pass EMC and other stringent radiation tests

This is the quality you should demand when using 240 VAC motor controllers.

Adjustable auto close
Auto-reset thermal protection
External key switch for safety and security
Dead man controls for open and close buttons
Automatic ground and travel distance calibration
Photocell, pedestrian and wireless remote control inputs
Supports NC or NO limit switch inputs or travel timer setup
Aux relay output to control courtesy lights and other accessories
24VDC output to supply external accessories such as loop detectors, swipe cards etc
Customised models available upon request

Suitable for motors up to 3kW (4.0HP)
Can be used with NO or NC limit switches
Test buttons for control inputs
Dual interlock for added safety
LEDs indicate when inputs are active. A very handy feature during installation or troubleshooting.
For detailed technical data, download the user manual

Ordering Information:

Part Number	Contents	Part Number	Contents
240S3	Suitable for 240VAC 3-Wire motors IP66 rated plastic enclosure UP/DOWN/STOP external buttons External key switch 190 x 290 x 140 mm	240S4	Suitable for 240VAC 4-Wire motors IP66 rated plastic enclosure UP/DOWN/STOP external buttons External key switch 190 x 290 x 140 mm

GSM Gate Opener: The GSM-1000 works on latest GSM technology. All you need is to insert a valid SIM card and program phone numbers of all users through simple SMS text commands. When an authorised user makes a call to the receiver, it rejects the call after a single ring and activates a relay. Since the call is rejected, the user is not charged for the call.

Related Products